Data driven modeling of plastic deformation

Daniele Versino, Tonda Alberto, Curt A. Bronkhorst

Computer Methods in Applied Mechanics and Engineering 2017;

Rhamnolipid CMC prediction

I.E. Kłosowska-Chomiczewska, K. Mędrzycka, E. Hallmann, E. Karpenko, T. Pokynbroda, A. Macierzanka, C. Jungnickel

Journal of Colloid and Interface Science 2016;

Numerical Investigation and Non-Dimensional Analysis of the Dynamic Performance of a Thermal Energy Storage System Containing Phase Change Materials and Liquid Water

Hebatallah Teamah, M.F. Lightstone and James Scott Cotton

ASME; doi:10.1115/1.4034642

Effective anisotropic compliance relationships for wing-cracked brittle materials under compression

Junwei Liu, Lori Graham-Brady

International Journal of Solids and Structures 2016;

Measurements of the Thermal Conductivity of 1,1,1,3,3-Pentafluoropropane (R245fa) and Correlations for the Viscosity and Thermal Conductivity Surfaces

Richard A. Perkins and Marcia L. Huber, Marc J. Assael

J. Chem. Eng. Data, Article ASAP, July 21, 2016; DOI: 10.1021/acs.jced.6b00350

Genetic Programming based High Performing Correlations for Prediction of Higher Heating Value of Coals of Different Ranks and from Diverse Geographies

Suhas B. Ghugare, Sanjeev S. Tambe

Journal of the Energy Institute, 2016; doi:10.1016/j.joei.2016.03.002

Concept for a Technology Assistance System to Analyze and Evaluate Materials and Tools for Milling

T. Auerbach, S. Gierlings, D. Veselovac, R. Seidner, S. Kamps and F. Klocke

ASME Turbo Expo 2015: Turbine Technical Conference and Exposition; doi:10.1115/GT2015-43209

Modeling the Effect of Filler Materials on Performance of Hot Mix Asphalt Using Genetic Programming

Mehran Mazari and Younes Niazi

Airfield and Highway Pavements 2015: pp. 107-119.; doi: 10.1061/9780784479216.011

A techno-economic analysis and optimization of Li-ion batteries for light-duty passenger vehicle electrification

Apurba Sakti, Jeremy J. Michalek, Erica R.H. Fuchs, Jay F. Whitacre

Journal of Power Sources (2014); DOI: 10.1016/j.jpowsour.2014.09.078

An effectiveness-NTU model of a packed bed PCM thermal storage system

N.A.M. Amin, M. Belusko, F. Bruno

Applied Energy, Volume 134, 1 December 2014, Pages 356-362; DOI: 10.1016/j.apenergy.2014.08.020

Peak, multi-peak and broadband absorption in graphene-based one-dimensional photonic crystal

R. Miloua, Z. Kebbab, F. Chiker, M. Khadraoui, K. Sahraoui, A. Bouzidi, M. Medles, C. Mathieu, N. Benramdane

Optics Communications 2014, DOI: 10.1016/j.optcom.2014.05.043

Statistical models for shear strength of RC beam-column joints using machine-learning techniques

Jong-Su Jeon1, Abdollah Shafieezadeh and Reginald DesRoches

Earthquake Engineering & Structural Dynamics 2014; DOI: 10.1002/eqe.2437

Artificial Intelligence-based Modeling of High Ash Coal Gasification in a Pilot Plant Scale Fluidized Bed Gasifier

Veena Patil-Shinde, Tejas Kulkarni, Rahul Kulkarni, Prakash D. Chavan, Tripurari Sharma, Bijay Kumar Sharma, Sanjeev S. Tambe, and B. D. Kulkarni

Ind. Eng. Chem. Res., Article ASAP; DOI: 10.1021/ie500593j

Experimental study of the density and viscosity of 1-octene and 1-decene at high temperatures and high pressures

Sagdeev, Damir I.; Fomina, Marina G.; Mukhamedzyanov, Gabdlnur K. H.; Abdulagatov, Ilmutdin M.

High Temperatures -- High Pressures . 2013, Vol. 472 Issue 6, p509-536. 28p.

Quantitative evaluation of fatigue life of cast aluminum alloys by non-destructive testing and parameter model, International Journal of Fatigue

Y. Tijani, A. Heinrietz, T. Bruder, H. Hanselka

Available online 18 June 2013

Referencing Eureqa

We greatly appreciate any attribution to Eureqa for your work.

Reference Eureqa »

Try Eureqa

Want to learn more about Eureqa?

Contact Us »